Migrate Torrent Jobs to Another PC

It's a tutorial about how you can move your uncompleted torrent job into another computer. Or you may need to format system and reinstall it but don't want to lost some downloaded data. Then here is a trick for you. Note that this trick is for Vuze users, future articles will be for bittorrent or uTorrent users.

• Pre-conditions: Azureus (Vuze) will resume BitTorrent partials however they started, as long as:

1. the downloaded data ("partials") are present on your hard disk drive (HDD) and
2. you have the original .torrent file.

---

• Process:

1. Make sure you have the exact .torrent file of what you were downloading.
2. Make sure you know the exact location of the partials on your HDD.
3. Open the .torrent in Azureus (Vuze) via (this is very important) File ->> Open ->> .Torrent File (No Default Save)
4. When asked where to save the file, point it to your partials. (See below image.)

   If the file has already been completely downloaded, you can change the "Add mode" to "Seeding", so that Azureus knows that you think that the file should be complete.

5. Wait. It will take a few minutes to check the data.

Click to Enlarge

• IMPORTANT NOTE: Azureus (Vuze) will tell you if a file with the same name already exists and will ask for your permission to check the file content's correctness. If the data in the already existing file is wrong, then it will get overwritten. So, if you try to use a different .torrent file, it is possible that you would erase the partial data you had downloaded.

Enjoy...!!!

Read More

How to earn money by Freelancing - A beginners Guide

Hello There,

Here i am going to share article on how to earn money using Freelancer.com. Many internet users are trying to find an ultimate way to earn money on internet but only few of them gets a proper way to earn. What are the reason behind that they fails. Either they have no proper guidance or they use other ways like advertising or PPC (pay per click) schemes but these way you can not earn as much as you want.

Freelancer.com is a only site that gives an opportunity to earn money as much as you want. This site gives you chance to show your skills and prove your best.

Now see what to do actually on freelancer.com. First of all create a new account . After you have two options 1st is to earn money by freelancing or 2nd is to hire freelancers to complete your projects.  But here I will talk about 1st option as it's our main topic.

As a free lancer now you have to complete your profile and then choose categories that which type of work you can do. There are thousands of hundreds jobs available. You can give exams to increase your chance of getting a job easily. You may write your experience in profile.

Then you can browse projects and then select any project matching your skills and bid on that project. Try to write good about your skills and experience such that employer like your proposal and hire you.

When you are hired do that project and give your best so when project completes you get good feedback score.

Such a way  you can do more and more projects and earn more and more but if you are beginner and new to freelancer.com you may face some problems due to low profile but don't worry as you go ahead you will understand importance of freelancing and you will feel that this is a too much better way then go to office daily and do work whole day in formal dress.

At last i want to say you that If you like this article and think that it's helpful to you then don't forget to say thanks.

Enjoy...!!!

Read More

Break Windows Xp / 7 Administrator Password Using Bootable USB Drive

Did you lose your windows password? Are you looking for solution for this? This tutorial will teach you how to reset or break windows7 Administrator password.

Read More

Enable Telnet in Windows7

Very few people are uses telnet client. When i want to use then i tried to open telnet in windows7 by typing 'telnet' in run but i got the error. It doesn't mean that it's not in windows7.

I searched and got that it was not installed by default in windows7 and windows vista. So to enable just follow simple steps to enable it.

1. Goto Control Panel.
2. Click on Programs and Features.

3. In the left pane Click on Turn Windows features on or off.

4. It will pop up new window. Here scroll down and select Telnet Client and Telnet Server press OK.

Enjoy !

Read More

Browse others PC without their Permission on LAN

Generally when we sit on computer network where two or more PCs are connected in LAN, like in office,college. We try to see others files and steal their data with the use of LAN. But often we fails. Even i also tries to steal others data. So i can guess that what's running on your mind. That's why i'm presenting here a hack with this you can browse their harddisk without permission on LAN.

To do this simply follow steps.
(Tested in Windows7)

1. Goto My Computer in the left pane click on Networks. You can see the names of PCs which are connected in LAN. (see image).
2. Click on any computer which you want to browse.

3. Here "SharedFolder" in image is only one shared folder on that computer. You can see that there is no other folder shared.

4.Now in address bar type "\\<that PC'sname>\d$\" ( here <that PC's name> = Pc's name you've clicked above. Without quotes. ). Here 'd$' stands for D drive, for C drive type C$, similarly E$,F$,... You can open all drives as above. Others don't need to share.

Enjoy !

Read More

How to Extend laptop's Wireless Antenna Range

I’ve been using a wireless Ethernet card in my laptop. But now the change from wired networking to wireless was an amazing shift. Now I could wander around my office or my home and connect to the Web. However, in many situations, I found that the range of the built-in antenna in the PC card was limited, and I desired additional range.

In this tweak I will show you two different and inexpensive ways to increase your laptops wireless LAN card antennas range. In this method we use old coffee can to make our new antenna. With this method we can send and receive data in one direction upto 16 times more powerful than built in antenna in your wireless card. And in another method we will use satellite dish TV antenna. It is highly directional and can send and receive data upto 10 kilometers to another disk in ideal conditions. Here below is Hack 1 - Increase wireless using coffee can.

In this hack you can use 802.11 network card of any brand. You will need 'pigtail' connector to connect wireless card on one hand and 'N' connector on another hand.

You will Need:

• A metal can : 3 - 3.5 inches diameter and 4 inches long (Metal soup can works well)
• 4-40 type screw and nuts : Quantity 4
• 12 Gauge copper wire : 4 inches
• N style RF connector
• A pigtail connector that has the proprietary Lucent connector on one end and an N connector on the other
• Low loss coaxial cable : 30 - 60 feet



Drill holes as above

• Soldering Iron

Process:

1. Take any can that has 3-3.5 inches diameter and equal to or longer than 4 inches and make sure that it's dry and clean and it's open end is free from ragged metal edges.

2.  Now drill a hole from approx. 2.5 inches from closed end of the can for N connector.

3. Now take an N connector and add a short piece of 12 gauge wire such that wire sticks up 1.25 inches from can walls.Now mount the N connector in the can where you have drilled a hole.

N Connector

4. Now open your wireless card and remove cap and connect that pigtail or don't want this pigtail step than open your card and solder a wire to the antenna inside.

5. Now connect soldered wire which is connected to antenna and 12 gauge wire which is connected with N connector. Now you have your wireless card connected with metal can. This metal can works as powerful antenna.

Location of N connector

Now start your laptop and aim open end of the can towards wireless access point or wireless enabled computer. Now note down signal strength and then remove antenna now again measure signal strength. You may see difference because when we attach antenna signal is polarizes in one direction.

WARNING:

Never look into the open end of your antenna when it is operating. Your antenna focuses the signal to levels that could be harmful.

Enjoy!

Read More

How to Create Your Own Portable App for USB Drives

There are many sites available on the internet which provides portable apps. But what to do when you can not find a particular app that you want portable version. So here with this easy trick you  can create your own portable app for USB Drives.

Here in my example i'm going to create portable app of Dropbox a cloud service desktop application. You can try your own file but for first time this is recommended before you try on other application.

Download Universal Extractor and WinRAR

For this you need two software one is Universal Extractor and another one is WinRAR. Install both this programs.

Extract any file using Universal Extractor 
Open Uni.Extractor and select a .EXE file you want to create portable. And press OK.

Find your Programs main EXE
Here you have to find a main EXE file in extracted which runs program. Probably it's name will be same as your programs name. Here in my example it's Dropbox.exe and which is in \$INSTDIR\Dropbox.exe 

Create SFX archive
Select all files in that folder and Right Click on it then select Winrar > Add to archive...

When new dialogue box appears Check 'Create SFX Archive' option and in compression method select 'Best'.

Then click on 'Advanced' tab and Click on 'SFX Option'. When new pop-up appears under 'Run After Extraction' box enter your main exe's name. For me it's Dropbox.exe.

Now switch to Mode Tab and check 'Unpack to temporary Folder'. And in Silent mode you can choose anything it affects when you are extracting your portable app. 'Display all' displays all progress, if you choose 'hide all' it works in silent mode none box will appear in screen, it will work in background. I've choosen Display all option.

In the last click on Update tab and under 'over write mode' select 'Overwrite all files'. Then hit OK twice.

You have done, you can see that one exe file will be there. It's your portable app, just copy it to your USB Drive and go any where. Enjoy your own Portable app.

Read More